The LUT follows the ITU-R BT.2100 transfer function to convert a brightness range of 1600% or 400% respectively into a linear brightness scale. LUT for viewing HDR (high dynamic range) images on the optional viewfinder and other monitoring devices. The signal output will use narrow range (video range) coding. LUT for viewing HDR images on external monitors compatible with the HLG standard defined by ITU-R BT.2100 standards. Select for deeper blacks and higher contrast. LUT for viewing HDR (high dynamic range) images on external monitors compatible with the PQ standard defined by ITU-R BT.2100 standards. The signal output will use full range coding. LUT for viewing on external monitors compatible with the ACESproxy standard established by ACES (Academy Color Encoding System). LUT for viewing on external monitors that support color spaces and gamma curves that follow the guidelines established by DCI (Digital Cinema Initiatives). LUT for viewing on external monitors compatible with ITU-R BT.2020 standards, which define parameters for ultra-high-definition television (4K/8K). LUT for viewing on the optional viewfinder and external monitors compatible with BT.709 specifications. The gamma curve and color space of the video output will change. Repeat steps 2 and 3 as necessary to select the LUT applied to other output terminals. Select the desired LUT and then press SET.From the monitoring menu select the LUT for XF-AVC Proxy clips with the instead. ![]() Using the control display, you can also select to apply a LUT to sub recording (XF-AVC Proxy) clips when the simultaneous sub recording is activated. Select the desired terminal and then press SET.To check the image on an external monitor, you will need a monitor that is compatible with the selected color space.Īvailable preset LUT options by gamma curve and color spaceĪvailable LUTs depend on the combination of gamma curve and color space used, whether it was set through one of the preset color settings or through the individual main settings in the custom picture file. When a LUTis applied, the displayed image will look as if a standard gamma curve and color space were used, making it easier to check the image on the monitoring device used. While recording using special gamma curves, you can apply a LUT to video output from the VIDEO terminal (optional viewfinder), SDI OUT terminals, MON.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |